Pages

Thursday, October 20, 2011

Configuring InterAS MPLS VPNs - CSC (Carriers Supporting Carriers)

In this blogtorial we will take a peek at how to configure InterAS MPLS. InterAS MPLS can be deployed to support customer sites traversing different SPs (Service Providers). 

In this topology we will have 3 customer Sites. 2 of them connection to two different PEs routers in the same AS and another site connected to another PE router in a different AS. 

Topology below and let's get started. 



Relevant configurations are posted below.


RR - R1

R1#sh run
Building configuration...

!
hostname R1
!
ip cef
!-- Turn on ip cef for mpls
!
interface Loopback0
ip address 10.0.0.1 255.255.255.255
!
interface GigabitEthernet1/0
description Connected to R2
ip address 1.1.1.5 255.255.255.252
negotiation auto
mpls ip
!-- Turn on mpls on the interface
!
interface GigabitEthernet2/0
description Connected to R3
ip address 1.1.1.1 255.255.255.252
negotiation auto
mpls ip
!-- Turn on mpls on the interface
!
interface GigabitEthernet3/0
description Connected to R7
ip address 1.1.1.9 255.255.255.252
negotiation auto
mpls ip
!-- Turn on mpls on the interface
!
router ospf 1
log-adjacency-changes
redistribute connected subnets
network 1.1.1.0 0.0.0.255 area 0
!
router bgp 100
no synchronization
bgp log-neighbor-changes
neighbor 10.0.0.2 remote-as 100
neighbor 10.0.0.2 update-source Loopback0
!-- iBGP with PE - R2
neighbor 10.0.0.3 remote-as 100
neighbor 10.0.0.3 update-source Loopback0
!-- iBGP with ASBR - R3
neighbor 10.0.0.7 remote-as 100
neighbor 10.0.0.7 update-source Loopback0
!-- iBGP with PE - R7
no auto-summary
!
address-family vpnv4
neighbor 10.0.0.2 activate
neighbor 10.0.0.2 send-community extended
neighbor 10.0.0.2 route-reflector-client
neighbor 10.0.0.3 activate
neighbor 10.0.0.3 send-community extended
neighbor 10.0.0.3 route-reflector-client
neighbor 10.0.0.7 activate
neighbor 10.0.0.7 send-community extended
neighbor 10.0.0.7 route-reflector-client
exit-address-family
!-- Turn on address-family vpnv4 to carry VRF and other information.
!-- Also enable route-reflector-client so iBGP routes will propgate throughout the AS
!
mpls ldp router-id Loopback0 force
!
!-- Lock down the ldp router-id
mpls ip
!
end

PE - R7

R7#sh run
Building configuration...
!
hostname R7
!
ip cef
!
ip vrf ONE
rd 100:1
route-target export 100:1
route-target import 100:1
!-- Create VRF and export / import routes
!
interface Loopback0
ip address 10.0.0.7 255.255.255.255
!
interface Loopback1
ip vrf forwarding ONE
ip address 192.168.7.7 255.255.255.0
!-- Create loopback to emulate customer's network and assign it to VRF ONE
!
interface GigabitEthernet1/0
description Connected to RR - R1
ip address 1.1.1.10 255.255.255.252
negotiation auto
mpls ip
!-- Turn on MPLS on this interface
!
router ospf 1
log-adjacency-changes
redistribute connected subnets
network 1.1.1.0 0.0.0.255 area 0
!
router bgp 100
no synchronization
no bgp default route-target filter
bgp log-neighbor-changes
neighbor 10.0.0.1 remote-as 100
neighbor 10.0.0.1 update-source Loopback0
!-- iBGP with RR - R1
no auto-summary
!
address-family vpnv4
neighbor 10.0.0.1 activate
neighbor 10.0.0.1 send-community extended
!-- Turn on address-family vpnv4 to carry VRF and other information.
exit-address-family
!
address-family ipv4 vrf ONE
redistribute connected
no synchronization
!-- Turn on ipv4 vrf to redistribute connected subnets so it can be sent over to RR - R1.
exit-address-family
!
mpls ldp router-id Loopback0 force
!
mpls ip
!
end

ASBR - AS100 - R3

R3#sh run
Building configuration...
!
hostname R3
!
ip cef
!
interface Loopback0
ip address 10.0.0.3 255.255.255.255
!
interface GigabitEthernet1/0
description Connected to RR - R1
ip address 1.1.1.2 255.255.255.252
negotiation auto
mpls ip
!-- Turn on MPLS on the interface
!
interface GigabitEthernet2/0
description Connected to ASBR - AS200 - R4
ip address 3.3.3.1 255.255.255.252
negotiation auto
mpls bgp forwarding
!-- enable to receive MPLS packets
!
router ospf 1
log-adjacency-changes
redistribute connected subnets
network 1.1.1.0 0.0.0.255 area 0
!
router bgp 100
no synchronization
no bgp default route-target filter
!-- This command is so the router can receive vpnv4 routes
bgp log-neighbor-changes
redistribute connected
neighbor 3.3.3.2 remote-as 200
!-- eBGP peer with ASBR - AS200 - R4
neighbor 10.0.0.1 remote-as 100
neighbor 10.0.0.1 update-source Loopback0
!-- iBGP peer with RR - R1
no auto-summary
!
address-family vpnv4
neighbor 3.3.3.2 activate
neighbor 3.3.3.2 send-community both
neighbor 10.0.0.1 activate
neighbor 10.0.0.1 send-community extended
exit-address-family
!-- Turn on address-family vpnv4 to carry VRF and other information.
!
mpls ldp router-id Loopback0 force
!
mpls ip
!
end

RR - R1

R2#sh run

hostname R2
!
ip cef
!-- Turn this on for MPLS
!
ip vrf ONE
rd 100:1
route-target export 100:1
route-target import 100:1
!-- Create VRF and export / import routes
!
interface Loopback0
ip address 10.0.0.2 255.255.255.255
!
interface Loopback1
ip vrf forwarding ONE
ip address 192.168.2.2 255.255.255.0
!-- Create loopback to emulate customer site network and assign it to VRF ONE
!
interface GigabitEthernet1/0
description Connected to RR - R1
ip address 1.1.1.6 255.255.255.252
negotiation auto
mpls ip
!-- Turn on MPLS on the interface
!
router ospf 1
log-adjacency-changes
redistribute connected subnets
network 1.1.1.0 0.0.0.255 area 0
!
router bgp 100
no synchronization
bgp log-neighbor-changes
neighbor 10.0.0.1 remote-as 100
neighbor 10.0.0.1 update-source Loopback0
!- iBGP peer with RR - R1
no auto-summary
!
address-family vpnv4
neighbor 10.0.0.1 activate
neighbor 10.0.0.1 send-community extended
exit-address-family
!-- Enable vpnv4 to exchange VPN/VRF information
!
address-family ipv4 vrf ONE
redistribute connected
no synchronization
!-- redistribute connected ipv4 vrf ONE routes
exit-address-family
!
mpls ldp router-id Loopback0 force
!
mpls ip
!
end

PE - R5

R5#sh run
Building configuration...
!
hostname R5
!
ip cef
!
ip vrf TWO
rd 100:1
route-target export 100:1
route-target import 100:1
!-- Create VRF and export / import routes
!
interface Loopback0
ip address 10.0.1.5 255.255.255.255
!
interface Loopback1
ip vrf forwarding TWO
ip address 192.168.77.1 255.255.255.0
!-- Create loopback to emulate customer's network and assign it to VRF TWO
!
interface GigabitEthernet1/0
description Connected to RR - R6
ip address 2.2.2.6 255.255.255.252
negotiation auto
mpls ip
!
router ospf 1
log-adjacency-changes
redistribute connected subnets
network 2.2.2.0 0.0.0.255 area 0
!
router bgp 200
no synchronization
no bgp default route-target filter
bgp log-neighbor-changes
redistribute connected
neighbor 10.0.1.6 remote-as 200
neighbor 10.0.1.6 update-source Loopback0
no auto-summary
!
address-family vpnv4
neighbor 10.0.1.6 activate
neighbor 10.0.1.6 send-community both
exit-address-family
!
address-family ipv4 vrf TWO
redistribute connected
no synchronization
exit-address-family
!
mpls ldp router-id Loopback0 force
!
mpls ip
!
end

ASBR - AS200 - R4

R4#sh run
!
hostname R4
!
ip cef
!
interface Loopback0
ip address 10.0.1.4 255.255.255.255
!
interface GigabitEthernet1/0
description Connected to ASBR - AS100 - R3
ip address 3.3.3.2 255.255.255.252
negotiation auto
mpls bgp forwarding
!
interface GigabitEthernet2/0
description Connected to RR - R6
ip address 2.2.2.1 255.255.255.252
negotiation auto
mpls ip
!
router ospf 1
log-adjacency-changes
redistribute connected subnets
network 2.2.2.0 0.0.0.255 area 0
!
router bgp 200
no bgp default ipv4-unicast
no bgp default route-target filter
bgp log-neighbor-changes
neighbor 3.3.3.1 remote-as 100
neighbor 10.0.1.6 remote-as 200
neighbor 10.0.1.6 update-source Loopback0
!
address-family ipv4
redistribute connected
neighbor 3.3.3.1 activate
neighbor 10.0.1.6 activate
no auto-summary
no synchronization
exit-address-family
!
address-family vpnv4
neighbor 3.3.3.1 activate
neighbor 3.3.3.1 send-community both
neighbor 10.0.1.6 activate
neighbor 10.0.1.6 send-community both
exit-address-family
!
mpls ldp router-id Loopback0 force
!
mpls ip
!
end

RR - R6

R6#sh run
Building configuration...
!
ip cef
!-- Turn this on for MPLS
!
interface Loopback0
ip address 10.0.1.6 255.255.255.255
!
interface GigabitEthernet1/0
description Connected to PE - R5
ip address 2.2.2.5 255.255.255.252
negotiation auto
mpls ip
!-- Turn on MPLS on the interface
!
interface GigabitEthernet2/0
Connected to ASBR - AS200 - R4
ip address 2.2.2.2 255.255.255.252
negotiation auto
mpls ip
!-- Turn on MPLS on the interface
!
router ospf 1
log-adjacency-changes
redistribute connected subnets
network 2.2.2.0 0.0.0.255 area 0
!
router bgp 200
no synchronization
bgp log-neighbor-changes
neighbor 10.0.1.4 remote-as 200
neighbor 10.0.1.4 update-source Loopback0
!-- iBGP peer with ASBR - AS200 - R4
neighbor 10.0.1.5 remote-as 200
neighbor 10.0.1.5 update-source Loopback0
!-- iBGP peer with PE - R5
no auto-summary
!
address-family vpnv4
neighbor 10.0.1.4 activate
neighbor 10.0.1.4 send-community both
neighbor 10.0.1.4 route-reflector-client
neighbor 10.0.1.5 activate
neighbor 10.0.1.5 send-community both
neighbor 10.0.1.5 route-reflector-client
exit-address-family
!
!-- Turn on address-family vpnv4 to carry VRF and other information.
!-- Also enable route-reflector-client so iBGP routes will propgate throughout the AS
!
mpls ldp router-id Loopback0 force
!
mpls ip
!
end


Let's verify.

Notice that I have connectivity from R2 to Loopback on R5 in AS200 and loopback on R7 in AS 100

CSC (Carriers supporting Carriers) .... Many more articles to come so stay tuned. "Join this site" on the right ----->


1 comment: