IT Blogtorials

In this blogtorial we are going to expand on my previous blogtorial " Configuring OTV - OTV Configuration and Verification " and c...

In this blogtorial, we will be configuring OTV using unicast-only transport mode as opposed to using multicast to discover neighbors etc. I...

In this blogtorial, I will go through OTV configuration on virtualized routers on Eve-NG and go through a few verification commands. I will ...

In this blogtorial I will walk-through on how to deploy Eve-NG on the cloud and more specifically on Google Compute Engine. I've tried ...

In this blogtorial, I will demonstrate how I used 'ethanalyzer' on a Cisco Nexus 3K to solve an intermittent issue -- random adjacen...

Well it is official. I've signed up for a git hub account. I can now start publishing some open source tools on my free time to help my ...

In this blogtorial I will briefly discuss a performance issue that had me stumped for a bit. But after some googling around I stumbled up on...

Hello fellow future CCIE's and blog readers ... I've done it and I can't express my excitement in words. I know I have not poste...

Booked my CCIE R&S v5 lab on 5/27/16 in San Jose, CA. Check back here for more updates on my experience ... Let's do this ...

I normally post "How-to articles..." however, I figured this time I'd share a thought that came into my head yesterday as I wa...

In this blogtorial we will go over the basics of LDP, discuss how LDP adjacencies are formed, and also take a look at LDP packets on the w...

In this blogtorial we will configure DMVPN Phase 3 and run EIGRP over the tunnel. After reading this blogtorial, I hope that you will have a...

In this blogtorial we will configure DMVPN Phase 2 and configure EIGRP over the DMVPN tunnel. Over the past few blogtorials we've been c...

In this blogtorial, we will configure DMVPN Phase 1 with OSPF and walk through some gotchas and some pitfalls to be on the look out for. D...