Configuring DMVPN Phase 3 w/ EIGRP

In this blogtorial we will configure DMVPN Phase 3 and run EIGRP over the tunnel. After reading this blogtorial, I hope that you will have a clear understanding of DMVPN Phase 3 and how it interacts with EIGRP. If you need a primer on DMVPN Phase 1 and Phase 2, please see my DMVPN blogtorials.

Here is the topology.

Configuring DMVPN Phase 2 w/ EIGRP

In this blogtorial we will configure DMVPN Phase 2 and configure EIGRP over the DMVPN tunnel. Over the past few blogtorials we've been concentrating on how to configure DMVPN Phase 1 and routing protocols over DMVPN Phase 1. One of the key disadvantage of Phase 1 is that all spoke to spoke traffic must pass through the HUB which is a bit inefficient. DMVPN Phase 2 improves on DMVPN Phase 1 by allowing for on-demand dynamic spoke to spoke tunnels based on traffic patterns.

Here is our topology.

Configuring DMVPN Phase 1 w/ OSPF

In this blogtorial, we will configure DMVPN Phase 1 with OSPF and walk through some gotchas and some pitfalls to be on the look out for.

Due to the hierarchical nature of OSPF and other adjacency intricacies, OSPF is generally discouraged in a DMVPN design. 

We are using the same topology as my previous blogtorial "Configuring DMVPN w/ IPSEC and EIGRP", however I'll post the base configs here as well. 

Here is our topology. 

Configuring DMVPN Phase 1 w/ IPSEC and EIGRP

In this blogtorial we will take a look at how to configure DMVPN, EIGRP over DMVPN and get the traffic going over the DMVPN encrypted using IPSEC. We will break the blogtorial in 3 parts. First we will configure the DMVPN / tunnel and verify end-to-end IP connectivity, then we will move on to configuring routing over the tunnel and finally get IPSEC configured to encrypt everything going over the tunnel.

Here is our topology.

Configuring DMVPN with OSPF (mGRE and IPSEC)

"I can build you any network you want -- fast/cheap/reliable. Just pick any 2" -- Not sure who said that however  it is true on many levels.

In this blogtorial we are going to take a quick tour on how to configure DMVPN (Dynamic Multipoint Virtual Private Network). So what is DMVPN? DMVPN gives you the ability to create VPN tunnels dynamically as needed between spokes in a hub-to-spoke topology. It can also scale very well to support a large number of remote endpoints. Please keep in mind that DMVPN is Cisco proprietary, however there are ways to implement it using Linux (OpenNHRP).

So here is the topology and let's get started.

Relevant configurations are posted below.